User's Guide

RELOCATION AND STORAGE OF SERVER SWITCH UNIT
Observe the following instructions to use the server and peripheral devices
safely. Failure to follow these instructions may result in death or serious
personal injury. See pages iii to xvi for details.
Do not disassemble, repair, or alter the server switch unit.
Disconnect the power cord and dedicated cables before working with the
server switch unit.
Observe the following instructions to use the server and peripheral devices
safely. Failure to follow these instructions may cause a fire, personal injury,
or property damage. See pages iii to xvi for details.
Be sure to completely install the server switch unit.
IMPORTANT：
■ If the server switch unit needs to be relocated or stored due to a
change in the floor layout to a great extent, contact your service
representative.
■ It is recommended that the server switch unit should be stored in a
place where the room temperature can be maintained. It is important
for the server switch unit to work normally after storage. Store the
unit in the place where temperature ranges between -10 to 55°C and
humidity ranges between 20 to 80%, without dew condensation.
8. Remove the power cord and dedicated cables from the server switch unit referring to Chapter
1. In cases where the server switch unit is installed in a rack, remove the unit from the rack.
9. Package the server switch unit with packaging material and shipping carton which originally
came with the unit. If you do not have them, use shock-absorbing material to shield the
server switch unit from excessive shock and/or vibrations so that the unit will not be
damaged.