Operation Guide

- 201 -
OSD Simple Mode
In OSD simple mode, the name of the CPU blade connected to the KVM is displayed in the upper
left of the screen. You can change the KVM connection by using the keyboard.
Activating OSD Simple Mode
Enter the hot key to start the OSD simple mode.
Hot key settings can be changed in the OSD menu mode or on the OSD Setup Menu of the
SIGMABLADE monitor.
 Select Hot Key
The following two hot keys are available to start the OSD simple mode:
Press the <Ctrl> key twice.
Press the <CapsLock> key twice.
 Operation timeout
If the keyboard is not operated for one minute or longer, the OSD simple mode is
canceled.
NOTE: While in the OSD simple mode, the keyboard is used
exclusively for operation of the OSD. Accordingly, you cannot use the
keyboard for the operating system on the CPU blade. To use the
keyboard for the operating system, exit the OSD simple mode. Mouse
operation is available while in the OSD simple mode.