Operation Guide

- 30 -
Blade Enclosure Name
-----------------------------------------------------------------
[RW_ENCLOSURE_SECTION]
CFG_ENCLOSURE_NAME = "<Enclosure Name>"
-----------------------------------------------------------------
<Enclosure Name>: blade-enclosure-name
<Example>
-----------------------------------------------------------------
[RW_ENCLOSURE_SECTION]
CFG_ENCLOSURE_NAME = "Enclosure-A"
-----------------------------------------------------------------
NOTES:
 NEC ESMPRO Manager accepts single-byte characters including
alphanumerics, period, hyphen, and underscore. Accordingly, it is
recommended to use these characters when specifying a name.
 If nothing is specified for CFG_ENCLOSURE_NAME, the value
stored in the Blade Enclosure is used as
"CFG_ENCLOSURE_NAME" in the configuration file.
Switch Module Name
-----------------------------------------------------------------
[RW_SWM_SECTION]
CFG_SWM_NAME1 = "<SWM-1 Name>"
CFG_SWM_NAME2 = "<SWM-2 Name>"
CFG_SWM_NAME3 = "<SWM-3 Name>"
CFG_SWM_NAME4 = "<SWM-4 Name>"
CFG_SWM_NAME5 = "<SWM-5 Name>"
CFG_SWM_NAME6 = "<SWM-6 Name>"
-----------------------------------------------------------------
<SWM-1 Name>: Name of the switch module installed in slot number 1
<SWM-2 Name>: Name of the switch module installed in slot number 2
<SWM-3 Name>: Name of the switch module installed in slot number 3
<SWM-4 Name>: Name of the switch module installed in slot number 4
<SWM-5 Name>: Name of the switch module installed in slot number 5
<SWM-6 Name>: Name of the switch module installed in slot number 6
<Example>
-----------------------------------------------------------------
[RW_SWM_SECTION]
CFG_SWM_NAME1 = "SWM-1"
-----------------------------------------------------------------
NOTE: NEC ESMPRO Manager accepts single-byte characters
including alphanumerics, period, hyphen, and underscore. Accordingly,
it is recommended to use these characters when specifying a name.