Operation Guide

- 53 -
Linkage with NEC DianaScope
Syntax
[RW_DSG_SECTION]
CFG_DSG_PASSWORD = <password>
CFG_DSG_ENABLE = <enable | disable>
CFG_DSG_IP1 = <IP Address1>
CFG_DSG_PORT1 = <port1>
CFG_DSG_IP2 = <IP Address2>
CFG_DSG_PORT2 = <port2>
Description
 CFG_DSG_PASSWORD
Stores the user password for linking with NEC DianaScope. See the Notes below.
 CFG_DSG_ENABLE
Specify whether to enable or disable linkage with NEC DianaScope. The default value is
"1" (enable).
1: (enable)
0: (disable)
 CFG_DSG_IP1
Specify the IP address of the primary destination for configuration change notification.
The default value is "0.0.0.0"
 CFG_DSG_PORT1
Specify the port number of the primary destination for configuration change notification.
The default value is "0."
 CFG_DSG_IP2
Specify the IP address of the secondary destination for configuration change notification.
The default value is "0.0.0.0"
 CFG_DSG_PORT2
Specify the port number of the secondary destination for configuration change notification.
The default value is "0."