User guide

11
Do not impose loads on the blade enclosure while it is pulled out of the rack.
Do not impose loads on the top of the blade enclosure while it is pulled out from the
rack. The frame may be damaged, and you may not be able to install the blade
enclosure on the rack. There is a risk of the blade enclosure falling and causing
injury as well.
Do not cover ventilation openings.
Do not cover ventilation openings of the blade enclosure. Additionally, do not cover
rack openings. If they are covered, the temperature of devices on the blade enclosure
may rise, which may result in a fire.
Do not leave the blade enclosure pulled out of the rack.
Do not operate or perform maintenance with the blade enclosure pulled out. Since
the brackets on the rack have no mechanism to prevent the blade enclosure from
falling off, such as a stopper or lock, pulling the blade enclosure fully out of the rack
can result in the blade enclosure falling and causing injury.
Do not hold any installed module or power unit cover.
When you carry the blade enclosure, do not hold any installed module or power
unit cover. Because they are movable, you might drop the blade enclosure if you
hold them.
Wear a wrist strap to eliminate static electricity.
Installed modules and peripheral devices contain parts that are sensitive to
electrostatic discharge. Wear a wrist strap to eliminate static electricity when you
install or remove the modules or peripheral devices or connect interface cables.
CAUTION
WARNING