User guide

142
Command
Access
rights
Description
Default value
EM card
active/
standby
Back
up
target
Remarks
MAC address of the EM
card
Web server settings
(Enable/Disable)
SNMP settings
(Enable/Disable)
SSH settings
(Enable/Disable)
Telnet settings
(Enable/Disable)
NTP settings
(Enable/Disable)
TRUSTED HOST
settings (Enable/Disable)
NTP server addresses
NTP server polling
interval
SHOW SNMP
A/O/U
Displays the setting
status of SNMP.
Display Items:
System name
Location information
Contact name
Community name
(Read/Write/Trap)
Trap destination
TrapACK settings
(Enable/Disable)
N/A
A/S
N
TRAPTEST
A/O
Issues the SNMP trap for
the test.
N/A
A/S
N
Enclosure management command
DOWNLOAD
CONFIG
A
Downloads the
configuration file of the
EM firmware.
Then EM firmware
reboots automatically to
apply the downloaded
configuration file.
N/A
A
N
FORCE
TAKEOVER
A
Switch the role of two EM
cards forcibly.
(Active/Standby)
N/A
A/S
N
RESTART EM
A
Restarts the EM
firmware.
N/A
A/S
N
SET
AUTOLOGOUT
A/O/U
Specifies the time until
CLI automatically
terminates when the CLI
is left not being operated.
60 min.
A/S
N
Effective only
in a session of
the
corresponding
CLI
SET DATE
A/O
Configures the date, time
and timezone of the EM
firmware.
Setting format:
MMDDhhmm{{CC}YY}
{TZ}
N/A
A/S
N
Time must be
configured
manually.
SET DISPLAY
EVENT
A/O/U
Enables or disables the
displaying of certain
events on the CLI
console.
"OFF"
(disable)
A/S
N
Effective only
in a session of
the
corresponding
CLI
SET ENCLOSURE
ASSET TAG
A/O
Configures the asset tag
of the blade enclosure.
""
(not configured)
A
Y
SET ENCLOSURE
MACHINE SERIAL
A/O
Configures the machine
serial number of the
blade enclosure.
(factory default)
or "" (not
configured)
A
Y
SET ENCLOSURE
NAME
A/O
Configures the blade
enclosure name.
The serial
number of the
blade enclosure
A
Y
SET ENCLOSURE
UID
A/O
Turns on/off the ID LED
of the blade enclosure.
N/A
A
N
SET POWER
A/O
Configures the policy of
PERFORMANCE
A
Y