User guide

144
Command
Access
rights
Description
Default value
EM card
active/
standby
Back
up
target
Remarks
Display Items:
Operating status
ID LED status
Power status・capacity
SHOW
ENCLOSURE
TEMP
A/O/U
Displays the temperature
of the blade enclosure.
Display Items:
Status (OK, warm,
degraded, or failed)
Temperature (in Celsius/
Fahrenheit)
N/A
A
N
SHOW POWER
A/O/U
Displays the settings on
power management
function.
Display Items:
Power redundancy mode
Suppliable power
capacity
Allocated power capacity
The status of power
saving
Maximum Consumable
Power
N/A
A
N
SHOW VERSION
A/O/U
Displays the version of
EM card/EM firmware.
N/A
A/S
N
UPDATE IMAGE
A
Updates the EM
firmware.
This command
downloads the EM
firmware image from the
specified URL (http, ftp,
tftp), and use it to update
the EM firmware
automatically.
After that, the EM
firmware automatically
reboots to apply the
updated image.
N/A
A
N
UPLOAD CONFIG
A
Uploads the configuration
information of the EM
firmware to the URL
specified.
N/A
A
N
SET POWER
SAVINGS
A/O
Configures the power
saving mode of the
power control function.
"OFF"
(disable)
A
Y
SET POWER
LIMIT
A/O
Configures the maximum
power consumption for
each enclosure.
"OFF"
(disable)
A
Y
CPU blade management command
POWEROFF
SERVER
A/O
Powers off the DC power
of the specified CPU
blade.
N/A
A
N
POWERON
SERVER
A/O
Powers on the DC power
of the specified CPU
blade.
N/A
A
N
REBOOT
SERVER
A/O
Resets the specified CPU
blade.
N/A
A
N
SET SERVER UID
A/O/U
Turns on or off the ID
LED of the specified CPU
blade.
N/A
A
N
SHOW SERVER
INFO
A/O/U
Displays the information
of the specified CPU
blade.
Display Items:
Blade type
Blade name
Part number
Serial number
N/A
A
N