User guide

169
Command name
ENABLE SECURESH
Argument
None
Example of execution
Default value
Enable
Supplementary information
Enabling the SNMP functions
Overview
Enables the SNMP functions of the EM firmware.
Command name
ENABLE SNMP
Argument
None
Example of execution
Default value
Enable
Supplementary information
Enabling the SNMP TrapAck functions
Overview
Enables the SNMP TrapAck functions (functions to wait for Ack against SNMP trap) of the EM firmware.
Command name
ENABLE SNMP TRAPACK
Argument
None
Example of execution
Default value
Disable
Supplementary information
You can set SNMSP trap destination supported SNMP TrapAck functions (e.g. NEC ESMPRO Manager
and Agent) for SNMP TRAPRECEIVER. If you set wrong SNMSP trap destination and enable the
SNMP TrapAck functions of the EM firmware, the same trap is issued two or more times.
Enabling the functions for Telnet connection