User guide

173
Example of execution
Default value
720 seconds
Supplementary information
Configuring the IP address of the primary NTP server
Overview
Configures the IP address of the primary NTP server.
Command name
SET NETWORK NTP PRIMARY
Argument
<IP address>
Example of execution
Default value
"0.0.0.0"
Supplementary information
Configuring the IP address of the secondary NTP server
Overview
Configures the IP address of the secondary NTP server.
Command name
SET NETWORK NTP SECONDARY
Argument
<IP address>
Example of execution
Default value
"0.0.0.0"
Supplementary information
Configuring the name of an SNMP community allowing the Get operation
Overview
Configures the name of an SNMP community allowing the Get operation.
Command name
SET SNMP COMMUNITY READ
Argument
<Community name>
Use up to 32 characters to specify the SNMP community name.
Note:
No reserved words can be specified for <Community name>.