User guide

174
Reserved word means terms defined in command line such as "SET", "ADD", and "RACK."
When <Community name> is enclosed by double quotation marks ("") with nothing quoted between
the marks, the current community name will be cleared.
Example: 'SET SNMP COMMUNITY READ ""'
Example of execution
Default value
"public"
Supplementary information
This command configures a community name for the Get operation.
If a different community name is specified by the command to configure the name of an SNMP community
allowing the Get/Set behaviors, which is described in the following section, note that the Get operation
works from both community names.
Configuring the name of an SNMP community allowing the Get/Set operation
Overview
Configures the name of an SNMP community allowing the Get/Set operation.
Command name
SET SNMP COMMUNITY WRITE
Argument
<Community name>
Use up to 32 characters to specify the SNMP community name.
Note:
No reserved words can be specified for <Community name>.
Reserved word means terms defined in command line such as "SET", "ADD", and "RACK."
When <Community name> is enclosed by double quotation marks ("") with nothing quoted between
the marks, the current community name will be cleared.
Example: 'SET SNMP COMMUNITY WRITE ""'
Example of execution
Default value
"public"
Supplementary information
This command configures a community name for the Get/Set operation.
If a different community name is specified by the command to configure the name of an SNMP community
allowing the Get behavior, which is described in the previous section, note that the Get operation works
from both community names.
Configuring the name of an SNMP community allowing the Trap operation
Overview
Configures the name of an SNMP community allowing the Trap operation.
Command name
SET SNMP COMMUNITY TRAP