User guide

176
Use up to 64 characters to specify the location.
Note:
No reserved words can be specified for <Location>.
Reserved word means terms defined in command line such as "SET", "ADD", and "RACK."
When <Location> is enclosed by double quotation marks ("") with nothing quoted between the
marks, the current location will be cleared.
Example: 'SET SNMP LOCATION ""'
Example of execution
Default value
"unknown"
Supplementary information
Configuring the blade enclosure location in the rack
Overview
Configures the information about the blade enclosure location in the rack, which is returned by SNMP.
Command name
SET SNMP LOCATION ENCLOSURE
Argument
<EIA Unit number>
Specify by a decimal number.
Range: from 0 to 255
Example of execution
Default value
"0"
Supplementary information
Configuring the rack height
Overview
Configures the information about the rack height, which is returned by SNMP.
Command name
SET SNMP RACKHEIGHT
Argument
<EIA Unit number>
Specify by a decimal number.
Range: from 0 to 255
Example of execution
Default value
"0"
Supplementary information