User guide

184
Change in the CPU blade temperature
Installation of a CPU blade
Removal of a CPU blade
EM reboot
Installation of an EM card
Removal of an EM card
EM card take over
* When this event occurs, the CLI is terminated and login users are forcefully logged out.
Command name
SET DISPLAY EVENT
Argument
"ON" | "OFF"
Example of execution
Default value
"OFF"
Supplementary information
This command takes effect during only the current CLI session.
When you log out the CLI console the configuration becomes disabled.
The default configuration value is "OFF."
Configuring the asset tag of the blade enclosure
Overview
Configures the asset tag of the blade enclosure.
Command name
SET ENCLOSURE ASSET TAG
Argument
<Asset number>
Use up to 32 characters to specify the asset number.
Note:
No reserved words can be specified for <Asset number>.
Reserved word means terms defined in command line such as "SET", "ADD", and "RACK."
When <Asset number> is enclosed by double quotation marks ("") with nothing quoted between the
marks, the current asset number will be cleared.
Example: ' SET ENCLOSURE ASSET TAG ""'
Example of execution
Default value
"" (blank)
Supplementary information
Configuring the machine serial number of the blade enclosure
Overview
Configures the machine serial number of a blade enclosure.