User guide

185
Command name
SET ENCLOSURE MACHINE SERIAL
Argument
<Machine serial number>
Use exactly 14 characters to specify a machine serial number.
Note
<Machine serial number> specifys the serial number of the blade enclosure.
You don't have to use this command. If you change <Machine serial number>, contact NEC's sales
representative.
Example of execution
1Z34AB7890(Administrator)> set enclosure machine serial F67890K6Y12345
Machine serial number changed to F67890K6Y12345.
1Z34AB7890(Administrator)>
Example of execution of the command to configure machine number of a blade enclosure
Default value
(factory setting value)
Supplementary information
(<Machine serial number> must be factory setting value.)
Configuring the blade enclosure name
Overview
Configures the blade enclosure name.
Command name
SET ENCLOSURE NAME
Argument
<Enclosure name>
Use up to 32 characters to specify the blade enclosure name.
Note:
No reserved words can be specified for <Enclosure name>.
Reserved word means terms defined in command line such as "SET", "ADD", and "RACK."
Example of execution
Default value
The same as "blade enclosure machine serial number."
Supplementary information
Configuring the ID LED of the blade enclosure
Overview
Turns the ID LED of the blade enclosure on or off.
Command name
SET ENCLOSURE UID
Argument
"ON" | "OFF"