User guide

189
Example of execution
1Z34AB7890(Administrator)>
#Script Generated by root
#Generated on: Fri Nov 24 18:07:42 2006
#Set Enclosure Information
SET ENCLOSURE ASSET TAG "test_Asset_Tag"
SET ENCLOSURE NAME "USE62619LD"
SET RACK NAME "2222"
SET ENCLOSURE MACHINE SERIAL "test1234567890"
SET RACK UID "test"
SET DSGPASSWORD "guest"
SET DSGSTATUS "1"
#Set Network Information
#NOTE: Setting your network information through a script while
# remotely accessing the server could drop your connection.
# If your connection is dropped this script may not execute to conclusion.
SET NETWORK ADDRESSRANGE 192.168.12.120 192.168.12.124 255.255.0.0
SET NETWORK GATEWAY 0.0.0.0
ADD NETWORK DNS 0.0.0.0
ADD NETWORK DNS 0.0.0.0
#Configure Protocols
ENABLE HTTPS
ENABLE SECURESH
ENABLE TELNET
#Configure Trusted Hosts
#REMOVE TRUSTED HOST ALL
DISABLE TRUSTED HOST
#Configure NTP
SET NETWORK NTP PRIMARY 0.0.0.0
SET NETWORK NTP SECONDARY 0.0.0.0
SET NETWORK NTP POLL 720
DISABLE NTP
#Set SNMP Information
SET SNMP CONTACT "unknown"
SET SNMP LOCATION "unknown"
SET SNMP COMMUNITY READ "public"
SET SNMP COMMUNITY WRITE "public"
SET SNMP COMMUNITY TRAP "public"
SET SNMP RACKHEIGHT 0
SET SNMP LOCATION ENCLOSURE 123
SET SNMP TRAPACKPORT 5002
ENABLE SNMP TRAPACK
ADD SNMP TRAPRECEIVER 192.168.1.15
ENABLE SNMP
#Uncomment following line to remove all user accounts currently in the system
#REMOVE USERS ALL
#Set Enclosure Manager Information
SET EM NAME "USE62619LD"
SET EM LANGUAGE JAPANESE
#Set Power Information
SET POWER REDUNDANCY POWERSUPPLY
SET POWER POLICY PERFORMANCE