User guide

197
Internal Data Shows FRU information validity. OK: valid, Failed: invalid (checksum error)
Redundancy Shows redundancy status. OK: redundant, Failed: non-redundant, Not Performed: no
checking is performed
Displays the blade enclosure temperature
Overview
Displays the temperature of the blade enclosure.
Command name
SHOW ENCLOSURE TEMP
Argument
None
Example of execution
1Z34AB7890(Administrator)> show enclosure temp
Locale Status Temp Caution Critical
------------------------- ------ -------- ------- --------
Enclosure OK 30C/ 86F --- ---
Enclosure Manager 1 OK 30C/ 86F 75C 80C
Blade Slot 1 --- 0C/ 32F --- ---
Blade Slot 8 --- 0C/ 32F --- ---
Blade Slot 9 --- 0C/ 32F --- ---
Blade Slot 16 --- 0C/ 32F --- ---
Switch Module 3 OK ---- --- ---
Switch Module 4 OK ---- --- ---
1Z34AB7890(Administrator)>
Example of execution of the command to display the blade enclosure temperature
Default value
Supplementary information
Displaying the settings on the power management function
Overview
Displays the settings on the power management function.
－Power redundancy mode (Individual power redundancy mode(N+1 redundant mode) /
AC duplex mode(N+N redundant mode))
－Power control policy (Performance preferred mode/maintain redundancy mode)
－Power capacity
－Power saving mode (ON/OFF setting)
－Maximum consumable power
Command name
SHOW POWER
Argument
None