User guide

199
image.
Command name
UPDATE IMAGE
Argument
<URL >
Example of execution
Example of the firmware location
IP address: 192.168.1.68
Path:/emfw0010.img (Specify relative path from the directory specified in the server.)
1Z34AB7890(Administrator)> update image tftp://192.168.1.68/emfw0010.img
Entering anything other than 'YES' will result in the command not executing.
Are you sure you want to update the Enclosure Manager's firmware? YES
Downloading image from tftp://192.168.1.68/emfw0010.img...
Verifying signature...successful!
The flash process begins in 10 seconds.
Flashing.100%
New firmware image flashed.
Enclosure Manager is rebooting.
Please Standby...
Restarting system.
NEC SIGMABLADE Enclosure Manager booting...
Example of execution of the command to update the EM firmware
Default value
Supplementary information
Type YES as prompted by a message on the screen.
Uploading (backing up) the configuration information
Overview
Uploads the configuration information of the EM firmware to a specified URL.
Command name
UPLOAD CONFIG
Argument
<URL>
Example of execution
Example of the location where configuration file is stored
IP address: 192.168.1.68
Path:/config2.txt (Specify relative path from the directory specified in the server.)
1Z34AB7890(Administrator)> upload config ftp://[user account]:[password]@
192.168.1.68/config.txt
Successfully uploaded the configuration script.
1Z34AB7890(Administrator)>
Example of execution of the command to upload the configuration information