User guide

201
control policy.
Command name
SET POWER LIMIT
Argument
<The maximum power consumption> | “OFF”
Configure <The maximum power consumption> in watts
Range of configurable values: 1500 to 9999
OFF： Disables the maximum consumable power setting
(Depend on the power redundancy mode and the power control policy)
If you configure the value more than total power supply (watts), this function works as the value
is total power supply (watts).
Example of execution
1Z34AB7890(Administrator)> set power limit 2000
Power Settings were updated to:
Redundancy Configuration : Power Supply Redundant
Power Policy Configuration : REDUNDANCY
Dynamic Power Savings : Off
Limit DC Output : 2000 W
Capacity : 11250 W
Redundant Capacity : 2250 W
Redundant Power : 9000 W
Power Allocated : 1289 W
Consumed Power : 189 VA
Maximum Consumable Power : 10944 VA
1Z34AB7890(Administrator)>
Example of execution of the command to configure the maximum consumable power setting
Default value
"OFF" （disable）
Supplementary information
When the configuration is successfully modified, it is effective.