User guide

213
―To send the break signal
When the serial connection is confused, you should send the break signal to recover the communication.
If the connection is still confused, select "D)isconnect" to disconnect the serial communication, and try to
connect the switch module again.
-----------------------------------------------------------------------------
-
Command: D)isconnect, C)hange settings, send B)reak, E)xit command mode > B
Sending BREAK...
Operation menu related to the session currently being connected
―To disconnect the connection to the serial console
When you select "D)isconnect", the serial connection will be closed.
WH040001120 console login:
-----------------------------------------------------------------------------
-
Command: D)isconnect, C)hange settings, send B)reak, E)xit command mode > D
-----------------------------------------------------------------------------
-
1Z34AB789012(Administrator)>
Operation menu related to the session currently being connected
Default value
Supplementary information
Some switch modules/pass-through cards are not connectible. For details, see the User's Guide of the
switch modules/pass-through cards.
In general, pass-through cards do not require the serial console connections. (Some pass-through cards may
have different specifications, in such case, you should follow to the descriptions in the user's guides or
manuals.)
Powering off switch modules
Overview
Shuts down the DC power of specified switch modules
Command name
POWEROFF SWITCH
Argument
<Slot number> | <Slot number> - <Slot number> | <Slot number>, <Slot number> | "ALL"
<Slot number> and '-'(hyphen) or ','(comma) must be separated by a blank space.