User guide

225
NEC Diana Scope control commands
Configuring an NEC DianaScope user password
Configures a user password for NEC DianaScope Gateway.
This user password is used as an authentication key in NEC DianaScope Manager.
Command name
SET DSGPASSWORD
Argument
<Password>
Use up to 16 characters to a password.
Example of execution
1Z34AB7890(Administrator)> set dsgpassword guest1
Changed DSG password.
1Z34AB7890(Administrator)>
Example of NEC DianaScope user password configuration
Default value
guest
Supplementary information
NEC DianaScope Manager requires entry of an authentication key, which is configured by this command
as user passwords, when you register a server (EM card). The value set by SET DSGPASSWORD
command (if you do not specify, the default value, "guest") should be configured as an authentication key
for NEC DianaScope Manager.
Displaying an NEC DianaScope user password
Overview
Displays an NEC DianaScope Gateway user's password.
This user password is used as an authentication key in NEC DianaScope Manager.
Command name
SHOW DSGPASSWORD
Argument
None
Example of execution
1Z34AB7890(Administrator)> show dsgpassword
DSG Password: guest
1Z34AB7890(Administrator)>
Example of NEC DianaScope user password display