User guide

238
Disposal
Contact NEC sales representative before disposal, collection or recycle of the device.
Transfer to third party
If this device or any of its accessories is transferred (or sold) to a third party, observe the following
instructions:
● Main unit of the blade enclosure
When this equipment is transferred (or sold) to a third party, hand this User's Guide as well.
● Software shipped with the blade enclosure
When the software shipped with this equipment is transferred (or sold) to a third party, the
following conditions should be satisfied.
Transfer all items shipped with this equipment. The transferring party should keep no copy of
any kind.
Satisfy conditions related to transfer and relocation as described in conditions to use software
attached to the software.
Transfer the blade enclosure after uninstalling software if transfer of the software is not
permitted.
Specification
Model Blade Enclosure (SIGMABLADE-H)
Type N8405-024F
Maximum allowable configuration
CPU blade Up to 16
Power Unit
Voltage AC200 - 240V ±10%
Frequency 50/60 Hz ±1Hz
Inlet 2 (Up to 6)
Fan 4 (Up to 8)
Size (W×D×H) 485mm×820mm×445mm (10U)
(Including projection)
Maximum electric power consumption 10415W (Maximum configuration)
Weight 67kg (Blade Enclosure (SIGMABLADE-H) with no
accessories installed)
~ 209kg (Maximum configuration*1)
Operation environment Temperature: 10~35%
Humidity: 20~80% (Non condensing)
*1 Weight, when the maximum number of CPU Blades (including NEC Express5800/140Ba-10) and other options are installed.