User guide

36
The following table lists mezzanine cards and their supported modules. Find your mezzanine card on the
table and check its supported module to see appropriate combinations. Before you install a mezzanine card,
check its type and number of ports to mount it on an appropriate slot.
Mezzanine card
Type
Number
of ports
Supported switch
module/
pass-through card
Supported CPU blade
NEC Express5800
1Gb*1
FC*2
120Bb-6
120Bb-d6
120Bb-m6
140Ba-10
1000BASE-T Adapter
(2ch)
(N8403-017)
1
2
Y
N
Y
Y
Y
Y
1000BASE-T Adapter
(4ch)
(N8403-020)
2
4
Y
N
Y
Y
Y
Y
Fibre Channel
controller
(N8403-018)
1
2
N
Y
Y
Y
Y
Y
Y: Supported
N: Not supported
*1 Corresponds to 1Gb Intelligent L2 Switch (N8406-022), 1Gb Intelligent L3 Switch (N8406-023) and 1Gb Pass-Through
Card (N8406-016).
*2 Corresponds to 4G FC Switch (12ports)(N8406-019), 4G FC Switch (24ports)(N8406-020) and FC Pass-Through Card
(N8406-017).
(When a 4G FC Switch (12ports)(N8406-019) is installed, there may be restrictions in CPU blade slots which can be
connected and corresponding mezzanine slots. For information on restrictions in CPU blade slots which can be connected,
see "Installing a CPU blade." For information on restrictions in supported mezzanine slots, see the illustrations shown on
previous pages to find information on correspondence to your CPU blades.)
If there is no description for your product, contact your NEC sales representative to obtain the latest User's
Guide. Mezzanine cards that have no connection with a switch module are not listed above. In principle,
such mezzanine cards can be installed without considering the interface with other mezzanine cards. For
details, see the User's Guides and manuals of the mezzanine cards and CPU blades to be installed.