User guide

50
Move on to the CPU blade slot cover for the lower level.
3. Remove the top 2 screws from the right side.
4. Loosen the lower 2 screws on the right side
and the 2 screws on the left side.
5. Extend the CPU blade slot cover until the 2
screws on the right side line up with the
center of the elongated hole. Tighten the 4
screws to secure the blade slot cover.
The CPU blade slot cover for the lower level is now ready to be combined.
Right side
Left side
To the center of
the elongated
hole
Right side