User guide
53
Disassembling a full-height CPU blade slot cover
To disassemble a full-height CPU blade slot cover into the original two CPU blade slot covers, see
the "Assembling a full-height CPU blade slot cover" and reverse the steps.
Important
Keep all screws.
To avoid screws and parts falling into the cabinet, device, or module,
do not disassemble a full-height CPU blade slot cover near any cabinet,
device, or module.
When you disassemble a full-height CPU blade slot cover into the original CPU blade slot covers,
note the following.
・ To restore the original CPU blade slot
covers, both of the blade slot covers
should be secured by screws at the top
of the elongated holes (the position
where a CPU blade slot cover is
shrunk most) as shown in the figure.
Screw at the top of the
elongated hole
Right side
Left side