User guide

54
Installing the EM card
Important
The EM card that can be installed on the blade enclosure is N8405-027.
The following illustration shows where EM cards can be installed:
The EM card that is included as standard should be installed on (1) in the illustration below. If you
add another EM card, it should be installed on (2). Attach a slot cover to a slot where no EM card is
installed.
Hint
Installing another EM card on the blade enclosure in addition to the EM card
included as standard on the blade enclosure allows for auto switching between the
active and the standby EM card for redundancy functions. For details, see
"Replacing modules."
(1)
Slot 1
Slot 2
Slot 1
Slot 2
(2)