User guide

56
Removing an EM card
Follow the steps below to remove an EM card.
1. If any cables are connected to the EM card, remove them.
2. Open the release lever. When you open the
release lever, press the stopper securing the
release lever rightward.
Check
Fully open the release lever until it stops.
3. Hold the release lever and pull the EM card
out of the blade enclosure until you can
hold its frame with both of your hands
(approximately 10cm).
Important
Do not hold the release lever to remove
the EM card. If you hold the release
lever, it may be damaged.
4. Firmly grip the right and left sides of the EM card to remove it from the blade enclosure.
If you want to use the blade enclosure with the EM card removed, attach a slot cover.
5. Close the release lever of the EM card.
(1)
(2)