User guide

62
2. To install a fan unit on the upper level of the blade
enclosure, hold the fan unit handle and the bottom
of the unit firmly with the handle facing down and
insert the fan unit slowly into the blade enclosure
halfway (approximately 10 cm). To install a fan
unit on the lower level of the blade enclosure, hold
the fan unit handle and the bottom of the unit
firmly with the handle facing up and insert the fan
unit slowly into the blade enclosure halfway
(approximately 10 cm). The illustration on the
right depicts installing a fan unit on the upper
level. For installation on the lower level, the
fan unit is turned upside down.
Important
Do not hold the fan unit lever to install the fan unit. If you hold the fan unit lever, it may be
damaged.
3. Slowly push the fan unit handle to insert the fan unit into the blade enclosure.
Removing a fan unit
Follow the steps below to remove a fan unit:
1. Check which fan unit you wish to remove.
2. Hold the fan unit handle to pull the fan unit
out of the blade enclosure approximately 10
cm while turning the fan unit lever leftward.
The illustration on the right depicts pulling
out a fan unit from the upper level. For
removal from the lower level, the fan unit is
turned upside down.
3. Hold the bottom of the fan unit firmly and
remove it from the blade enclosure. If you
want to use the blade enclosure without
installing a new fan unit on the fan unit slot,
attach a slot cover.
Important
● Do not hold the fan unit lever to remove the fan unit. If you hold the fan unit lever, it may be
damaged.
● Turn the fan unit lever toward the indicated direction. If you turn the fan lever toward the
wrong direction, the fan lever may be damaged.
(1)
(2)
Handle
Fan unit lever
Fan unit lever
Turning the fan unit
lever leftward
Pull the fan
unit.