User guide

66
Connecting cables
Connect cables according to the requirements of your environment. For information on connecting cables,
see the manuals of the installed devices.
Front
Use a K410-150(00) SUV cable, which is sold separately, to connect the SUV connector located
on the front side of a CPU blade to the local console.
* The SUV connector and the local console are not supported by some CPU blades. For details, see
the User's Guide of the CPU blade. Even if there is an SUV connector present, the local console
may not be supported.
Important
The SUV cable that can be connected to a CPU blade is K410-150(00).
Local console
Connect a USB keyboard to the keyboard/mouse connector of the SUV cable, and then connect a
USB mouse to the USB connector of the keyboard. The cable of the display device should be
connected to the monitor connector of the SUV cable. See the User's Guide of the CPU blade as
well.
It is assumed that the local console is used for installation of an OS and for emergency operation.
For general operation, do not use CPU blades with a SUV cable connected. Some CPU blades do
not support installation of an OS through the SUV cable. For details, see the User's Guide of the
CPU blade.
Important
● For general operation, do not use CPU blades with a SUV cable connected. If you always use
CPU blades with a SUV cable, there is a risk of damage to the SUV cable or connector.
● Make sure not to snag or pinch the SUV cable. There is a risk of damage to the SUV cable,
CPU blades and the blade enclosure, and other modules.