User guide

LAN console

When the LAN connector of a switch module or pass-through card is connected to a PC by a

network cable (RJ-45), you can remotely control and operate CPU blades.

These input and output devices are collectively called "LAN console" and the network is called

"user LAN." You can operate CPU blades and switch modules on the blade enclosure on a PC via a

LAN network.

Important

● Make sure the IP addresses have subnet masks available on the network.

● Check that the IP addresses you are configuring do not conflict with any network devices on

the network.

For the LAN console use a device whose specifications are equivalent to the device used for the

EM serial console (the EM serial console, EM console, and LAN console can share one PC).

For details on connection and how to use the LAN console, see the User's Guides and manuals of

the GbE intelligent switch (L2)(N8406-022), GbE intelligent switch (L3)(N8406-023), GbE

pass-through card (N8406-016), and CPU blades.

(Network hub)

Blade enclosure

ESMPRO Mg

DianaScopeMg

Network Mg