User guide

4. Attach a cable clamp (L) to the blade encl

osure.

Place the cable clamp (L) under the power

cord and adjust the power cable to the

clip of the cable clamp.

Open the clip of the cable clamp and inser

t the power cord into the clip. Do this for

each power cord (up to three cords).

Bring the cable clamp to the blade enclosu

re and carefully insert the tabs of the cabl

e clamp into the slots on the blade enclos

ure.

Check

You will hear a click sound when you attach the cable clamp to the blade

enclosure.

5. Secure the power cords to the cable clam

p (L).

Slide the clip of the cable clamp to the en

d of the plug cap of the power cord. The

n, close both sides of the clip firmly to s

ecure the power cord. Do this for each po

wer cord (up to three cords).

6. Attach a cable clamp (R) to the blade enclosure and secure the power cords (up to three cord

s) to the cable clamp in the same way (see Steps 4 and 5).

①

②

Clip