User guide

8
Installation and handling of the rack
Install the server rack ONLY in a specified or designated environment
Do not install the rack on which the blade enclosure is installed in an unsuitable
place.
Other devices installed on the blade enclosure or the rack may be affected, a fire may
occur, or the rack may fall, causing injury. For details about installation environment
and quake-resistant engineering, see the manual attached to the rack or contact your
maintenance service agent.
Do not install the blade enclosure in a non-conforming rack
Install the blade enclosure in a 19-inch rack conforming to the EIA standard. Do not
install the blade enclosure in a nonconforming rack, otherwise devices on the blade
enclosure may not function properly, and there is a risk of injuries or damage to
physical assets. For more information about suitable racks on which the blade
enclosure can be installed, contact your sales representative.
Set up noise treatment
The blade enclosure may emit loud noises from fans when it is operating. It is
recommended to install the blade enclosure in a dedicated room that is distant from
people. Arrange acoustic noise treatment such as partitions if you work near the
operating blade enclosure for a long period of time.
WARNING