User guide

82
The power units that are equipped as standard should be installed on (1) (there are two slots shown
as (1)). When additional power units are installed, install them in the order of (2) to (5) as shown in
the illustration below. Slots with no additional power unit installed should have slot covers attached.
For information on the number of power units required, see "Power unit installation guide."
Important
Slot covers that can be installed on power unit slots of the blade enclosure are power
slot covers N8405-036.
(1)
(1)
(2)
(3)
Slot 1
Slot 2
Slot 3
Slot 4
Slot 5
Slot 6
(4)
(5)