User's Guide

34
Mounting the Blade Enclosure unit
With four or more people, carry the Blade Enclosure in a way that its front side comes short. Then push it
slowly into the rack with the unit mounted on the L-shaped frames.
IMPORTANT:
When you carry the enclosure unit, hold the handles on both sides and the top panel (the upper side of
the slots 1 and 8) of the enclosure.
CHECK:
Check carefully if the enclosure stays properly mounted on the L-shaped frames of the rail brackets
during the installation.
After pushing the unit all the way into the rack until the unit goes no further, secure the unit with two M5
screws on the left-side and right side of the front, all together four screws.