User's Guide

42
Installing power units
Use the following procedure to install a power unit.
Observe the following instructions to use the Blade Enclosure safely. Failure to
follow these instructions may result in death or serious personal injury.
See pages 4 to 14 for details.
 Do not insert any wire and metal objects
1. Remove any blank cover from
the slot where the fan unit is to be installed.
To remove the cover, press and hold
the ejector down, and pull the cover
out of the slot.
IMPORTANT:
Keep the removed blank cover in a safe place.
2. Insert the power unit into the rear
of the Blade Enclosure.
IMPORTANT:
Do not touch plug terminals of a power unit.
Do not insert a wire or metal object. Do not let
in dust or waste.
Check:
Enusre you hear the click of ejector when
inserting the power unit into the Blade
enclosure. The click sound indicates the
power unit is locked into the blade enclosure.
The procedure is now complete.
Ejector
Blank cover
Rear View