Manualshelf

User's Guide

ManualsBrandsNEC ManualsBlade ServersNEC N8405-040F SIGMABLADE-Hv2 Enclosure
41424344454647484950
48
IMPORTANT:
You can install a mezzanine card for blades on the 140Ba-10 expansion slot 4 only when the
CPU blade is enclosed in the same enclosure unit, and is not using the 1000BASE-T (4ch)
connection board.
Mezzanine card for blades with different interface types cannot be installed simultaneously on
mezzanine expansion slots 1 and 3.
Mezzanine card for blades with different interface types can be installed simultaneously on
mezzanine expansion slots 2 and 4. Only the combination of 100BASE-T (2ch) connection
board with Fiber Channel controller (2ch) are supported.