User's Guide

63
Installing separators
Use the following procedure to install a separator.
1. Refer to “CPU Blades” on page 53 and determine which slot’s separator needs to be installed.
2. Slide the lock on the separator to the right to unlock it, hold the separator with both hands, and slide it
slowly into the Blade Enclosure.
TIPS:
If the separator is unable to slide past halfway, never put excessive pressure on it. The alignment of the
separator may be improper. If this is the case, align the separator vertically so that it is positioned on the
hooks on both sides within the slot.
3. Push the separator all the way in
and slide the lock to the left to lock it.
CHECK:
Ensure that it is properly locked.
Check this by attempting to move
the separator back and forth to see
whether it moves or not. If it moves,
it is improperly locked.
The procedure is now complete.