User's Guide

Assembling a full-height CPU blade slot cover

Use the following procedure to combine two half-height CPU blade slot covers to create a full-height CPU

blade slot cover.

Use either of the two half-height CPU blade slot cover for the upper or lower section of a full-height slot

cover.

1. Determine the half-height CPU blade slot cover

to use for the upper section, loosen the joint

bracket’s screw inside and remove the bracket.

2. Fit the tab at one end of the joint bracket into

the bottom of the CPU blade slot cover that

you will use for the upper section. Then tighten

the screw to secure the bracket to the slot cover.

Joint bracket

CPU blade slot cover for the upper section

Screw