User's Guide

75
The Optical Disk Drive
Your server is equipped with the optical disk drive on its front side.
Observe the following instructions to use the Blade Enclosure safely. Failure to
follow these instructions may result in serious personal injury.
See pages 4 to 14 for details.
 Do not leave the tray ejected from the optical disk drive.
Setting the disk
Set the disc in the following procedure.
1. Ensure that the Blade Enclosure is powered (the power lamp lights green) before inserting a disk into
the optical disk drive.
2. Press the eject button on the front of the optical disk drive.
3. Put the disk on the tray carefully and securely with the character printed surface facing upward..
4. Push the front of the tray lightly to retract it into the drive.
IMPORTANT:
If a noisy driving sound occurs in the optical disk drive after inserting a disk, insert it again properly.
Removing the disk
To take out the disk from the optical disk drive, press the eject button to make the tray come out as in
setting the disk.
If the access lamp is lit, the disk is being accessed. Ensure that the access lamp is unlit before pressing the
eject button.
After taking out the disk, slowly and gently push the tray into the drive.