User's Guide

78
Disposal
Contact NEC sales representative before disposal, collection or recycle of the device.
Transfer to third party
If this device or any of its accessories is either transferred or sold to a third party, observe the following
instructions.
 Main unit of the Blade Enclosure
When this equipment is transferred or sold to a third party, hand over this User’s Guide with the
device.
 Software shipped with the Blade Enclosure
When the software shipped with this equipment is transferred or sold to a third party, the following
conditions should be satisfied.
Transfer all items shipped with this equipment.
The transferring party should not keep a copy of any kind.
Satisfy conditions related to transfer and relocations as described in “Conditions to Use Software”
attached to the software.
Transfer the Blade Enclosure after uninstalling software if transfer of the software is not
permitted.
Specification
Model
Blade Enclosure (SIGMABLADE-Hv2)
Type
N8405-040F
Maximum allowable configuration
CPU blade
Up to 16
Power Unit
Voltage
200-240VAC ±10%
100-120VAC ±10%
Frequency
50/60Hz ±1Hz
Inlet
0 (up to 6)
Size (W×D×H)
483mm×823mm×442mm (10U)
(including projection)
Maximum electric power consumption
11862W (Maximum configuration)
Weight
68kg (Blade Enclosure (SIGMABLDE-H) with no
accessories installed)
up to 199 kg (Maximum configuration)
Operation environment
Temperature: 5 - 35°C
Humidity; 20 - 80% (Non-condensing)