User's Guide

102
Item
Default value
Remarks
Default user settings
“Administrator”
User settings are
included.
SNMP settings
Community name for Get
“public”
Community name for Get/Set
“public”
Community name for Trap
“public”
Location
“unknown”
Contact destination
“unknown”
Trap destination
““
Unconfigured
TrapAck settings
Disable
TrapAck port number
“5002”
DianaScope Gateway settings
DSG user password
“guest”
DSG status
“1”
1:Enable
CPU Blade setting
CPU blade delay time
（specified to the individual slot）
“0”
0 (disabled)
Enclosure management command
Power control policy
PERFORMANCE
Power redundancy mode
POWERSUPPLY
(N 1 redundant mode)
Power saving mode
OFF (disable)
Blade Enclosure interface connection
setting
Disable
SIGMABLADEMONITOR control command
Enable/disable SIGMABLADEMONITOR
password
Enable
SIGMABLADEMONITOR backlight off
time setting
1 min
Supplementary information
Only users with the ADMINISTRATOR right can use this command.
Type YES as prompted by a message on the screen.