User's Guide

118
Configuring an SNMP contact
Overview
Configures a contact returned by SNMP.
Command name
SET SNMP CONTACT
Argument
<Contact name>
Use up to 64 characters to specify the SNMP contact name.
When <Contact name> is enclosed by double quotation marks (““) with nothing quoted between
the marks, the current community name will be cleared.
Example: „SET SNMP CONTACT‟”“
Execution example
Default value
“unknown”
Supplementary information
Configuring an SNMP location
Overview
Configures the location information returned by SNMP.
Command name
SET SNMP LOCATION
Argument
<Location>
Use up to 64 characters to specify the location.
When <Location name> is enclosed by double quotation marks (““) with nothing quoted between
the marks, the current community name will be cleared.
Example: „SET SNMP LOCATION‟”“
Execution example
Default value
“unknown”
Supplementary information
Configuring the Blade Enclosure location in the rack
Overview
Configures the information about the Blade Enclosure location in the rack, which is returned by
SNMP.