User's Guide

127
Configuring date and time
Overview
Configures the date, time and time zone of the EM firmware.
Command name
SET DATE
First Argument
<Date>
Format: “MMDDhhmm{{CC}}YY”
MM : month
DD : day
hh : hour
mm : minute
CCYY: Year
Second Argument
<Time zone> (optional)
Time zone: specify a time zone. If you do not specify this option, the current time zone is used.
Execution example
Default value
Time zone: “JST”
Supplementary information
See “Appendix” (180 page) for information about available time zones.
Configuring the function display events
Overview
Enables or disables the function to display certain events on the CLI console.
Events to be displayed:
Change in the Blade Enclosure status
Change in the switch module status
Switch module reset
Installation of a switch module
Removal of a switch module
Change in switch module temperature
Disabling a user account*
Removal of a user account *
Change in access right of the login user *
Change in the name of the blade enclosure
Change in the cooling status
Change in the fan status
Installation of a fan unit
Removal of a fan unit
Change in the temperature status
Change in the power unit status
Installation of a power unit
Removal of a power unit
Change in the power redundancy mode
Change in the CPU blade status
Change in the CPU blade temperature