User's Guide

129
Configuring the asset tag of the Blade Enclosure
Overview
Configures the asset tag of the Blade Enclosure.
Command name
SET ENCLOSURE ASSET TAG
Argument
<Asset number>
Use up to 32 characters to specify the asset number.
When <Asset number> is enclosed by double quotation marks (““) with nothing quoted between
the marks, the current asset number will be cleared.
Example: „“SET ENCLOSURE ASSET TAG”‟
Execution example
Default value
““ (blank)
Supplementary information
Configuring the machine serial number of the Blade Enclosure
Overview
Configures the machine serial number of a blade enclosure.
Command name
SET ENCLOSURE MACHINE SERIAL
Argument
<Machine serial number>
<Machine serial number> specifies the serial number of the blade enclosure.
You don‟t have to use this command. If you change <Machine serial number>, contact NEC‟s
sales representative.
Execution example
Example of execution of the command to configure the machine serial number of a Blade Enclosure