User's Guide

131
Configuring the power control policy
Overview
Configures the policy of the power control function.
Command name
SET POWER POLICY
Argument
[ PERFORMANCE | REDUNDANCY | RECOVERABLE ]
PERFORMANCE: Performance preferred mode （usage of power is preferred even if the
redundancy cannot be maintained）
REDUNDANCY: Redundancy preferred mode（power redundancy is maintained）
RECOVERABLE: Redundancy recovery mode(power redundancy is recovered)
Execution example
Default value
PERFORMANCE
Supplementary information
You cannot select the following combination for power control policy and power redundancy
mode.
Power control policy: Performance preferred mode (PERFORMANCE)
Power redundancy mode: N+N redundant mode (AC)
Configuring the power redundancy mode
Overview
Configures the redundancy mode of the power control function.
Command name
SET POWER REDUNDANCY
Argument
[ AC | POWERSUPPLY ]
AC: N+N redundant mode
POWERSUPPLY: N+1 redundant mode
Execution example
Default value
N+1 redundant mode
Supplementary information
You cannot select the following combination for power control policy and power redundancy
mode.
Power control policy: performance preferred mode (PERFORMANCE)
Power redundancy mode: N+N redundant mode (AC)