User's Guide

148
Configuring the maximum consumable power setting
Overview
Configures the maximum power consumption for each enclosure.
The maximum power consumption management is to manage the power consumption of each of
the modules configuring the system so that the maximum power consumption in the system is
maintained within a certain value. If you enable this function, the EM card uses the value smallest
among <The maximum power consumption> and upper limits determined by the power
redundancy mode and the power control policy.
Command name
SET POER LIMIT
Argument
<The maximum power consumption> | “OFF” Configure <The maximum power consumption> in
watts Range of configurable values: 1 to 65535 OFF： Disables the maximum consumable power
setting (Depend on the power redundancy mode and the power control policy)
If you configure the value more than total power supply (watts), this function works as the value is
total power supply (watts).
Second Argument
Execution example
Example of execution of the command to configure the maximum consumable power setting
Default value
“OFF”（disable）
Supplementary information
This function becomes effective when the configuration is successfully modified.