User's Guide

160
Switch module management command
Connecting to the EM serial console of the switch module
Overview
Connects the serial console of the specified switch module.
Command name
CONNECT SWITCH
Argument
<Slot number>
Execution example
Example of execution of the command to connect to switch module serial console
―CONNECT SWITCH command menu operations
The CONNECT SWITCH command supports the following operations:
The CONNECT SWITCH command supports functions to:
suspend the switch module serial console and return to the EM console.
modify the settings related to switch module serial console connection.
send break signal.
― To start the menu
Press following keys on the switch module serial console to start the menu screen.
On Japanese keyboard: press CTRL + SHIFT+- (hyphen)
On English keyboard: press CTRL + SHIFT +_ (underscore)
When you press the keys correctly, the menu starting with “Command:” as shown below is
displayed.
Switch module serial console operation menu
―To modify the serial console connection settings
Press <C> key to enter the serial console settings menu. In this menu, you can modify the settings
of:
About this session (the prohibition of use of escape characters on the serial communication)
About the serial communication (a baud rate and a flow control policy)
Operation menu related to the session currently being connected