User's Guide

167
Displaying the switch module map information (E-Keying information)
Overview
Displays the port mapping information on specified switch modules.
Command name
SHOW SWITCH PORT MAP
Argument
<Slot number> | <Slot number> - <Slot number> | <Slot number> , <Slot number> | “ALL”
<Slot number> and „-‟(hyphen) or „,‟(comma) must be separated by a blank space.
Execution example
Example of execution of the command to display switch module port map information (E-Keying
information)
Default value
Supplementary information
Port*1 Switch module port number
Status The port status of the switch module. OK: Normal (E-Keying is matched),
Mismatch: E-Keying is mismatched, No Connect: Normal (No connection between
the switch module and mezzanine card)
Blade The number of the CPU blade connected to the port of the switch module.
Mezz/Nic The number of mezzanine card connected to the switch module port or the number
corresponding to the standard slot (for LAN)
Port*2 The number of mezzanine card connected to the switch module port
*1 “Port” shown above “Status”
*2 “Port” shown above “Mezz/Nic”