User's Guide

172
Displaying EM card status
Overview
Displays the status of EM card(s)
Information to be displayed:
EM card name
Active/standby
ID LED status
EM card status
EM language type
Command name
SHOW EM STATUS
Argument
<Slot number> | “ALL” (optional)
The blade enclosure supports up to two EM cards. Specify the slot number of the target EM card.
You can specify either 1 or 2.
When you skip the slot number, the EM card you are now logging on is specified.
Execution example
Example of status of EM cards
Default value
Supplementary information
About Redundancy status
NORMAL EM cards are successfully in the redundant mode.
DEGRADED Communication to the other card is disconnected, synchronizing the
configuration between two EM cards has failed, or the EM cards use
different versions of the EM firmware.
FAILED There is a fatal error in communication to the other EM card.
UNKNOWN The status of the other EM card cannot be retrieved.
NOT REDUNDANT EM cards are not in the redundant mode.