User's Guide

174
NEC DianaScope control commands
Configuring an NEC DianaScope user password
Overview
Configures a user password for NEC DianaScope Gateway.
This user password is used as an authentication key in NEC DianaScope Manager.
Command name
SET DSGPASSWORD
Argument
<Password>
Use up to 16 characters to a password.
Execution example
Example of NEC DianaScope user password configuration
Default value
guest
Supplementary information
NEC DianaScope Manager requires entry of an authentication key, which is configured by this
command as user passwords, when you register a server (EM card). The value set by SET
DSGPASSWORD command (if you do not specify, the default value, “guest”) should be
configured as an authentication key for NEC DianaScope Manager.
Displaying an NEC DianaScope user password
Overview
Displays an NEC DianaScope Gateway user‟s password.
Command name
SHOW DSGPASSWORD
Argument
None
Execution example
Example of NEC DianaScope user password display
Default value
Supplementary information