User's Guide

195
Power unit
The list of power units appears as shown in the figure below.
The upper part indicates the information on power control in the system. The lower part lists the
information on the power units.
The upper part arranges the power redundancy mode, power control policy and power redundant status
in the system from left to right. At the right end, the button for switching to the detailed information
display of the power system appears.
The lower part arranges the installation location, STATUS lamp condition and installation states of the
power units from left to right. At the right end, each raw has the button for switching to the detailed
information display of the relevant power unit.
When you click the [Detail] button of a power unit, the detailed information on the power unit
appears.
The detailed information display of a power unit is described later.