User's Guide

197
Detailed System Information
CPU Blade
When you click the [Detail] button on [CPU Blade List] window, the following screen appears.
Each tab represents the installed slot.
Click the tab to switch the CPU blade which you want to view the detailed information.
The displayed data consists of General Information, System Board and Embedded Device information
from top to bottom.
The general information includes the name, size, type and firmware revision of the blade, the STATUS
and Power LED states, the virtual LCD display, the ID LED state and the IP address of the NEC
EXPRESSSCOPE Engine.
Click [ON] or [OFF] button on the line of ID LED to operate the ID LED of the selected CPU
blade.
When you click the [HTTP] or [HTTPS] button, the Web page of NEC EXPRESSSCOPE Engine for
the
selected CPU blade opens in separate window.
When you click the [telnet] link, the command line console of NEC EXPRESSSCOPE Engine for the
selected CPU blade opens in separate window.
CHECK:
For more information about EXPRESSSCOPE Engine, refer to the “EXPRESSSCOPE Engine User‟s
Guide”.
TIPS:
The telnet link feature may be disabled depending on the OS of management console or configuration
of Web browser. With Internet Explorer Ver. 6 of Windows XP and Mozilla FireFox 2.0, it is
confirmed that the telnet feature is available by the default setting.